Five steps to quickly replace the protective lens of laser cutting machine

Laser cutting process is the use of invisible light beam instead of the traditional mechanical knife, with high precision, fast cutting, not limited to cutting pattern restrictions, automatic layout to save material, smooth kerf, low processing costs, etc., will gradually improve or replace in the traditional metal cutting process equipment.

 Laser cutting machine protection lens, also called laser cutting machine focus lens, laser cutting machine focus lens is a more precise optical components, laser cutting machine protection lens is very important to the laser cutting machine, its cleanliness directly affects the processing performance and quality of laser cutting machine.

 The protective lens is a very important precision component of the laser cutting machine optical system, its cleanliness has a great impact on the processing performance and quality of the laser cutting machine. So, for the life of the protective lens, how to carry out the correct replacement operation? Lixing laser technical staff to answer your analysis.

Five steps to quickly replace the laser cutting machine protective lens analysis.

 Improper choice of laser cutting machine protective lens will cause large laser loss, frequent damage to the protective lens, product quality instability, causing serious losses to the enterprise. Although the laser cutting machine protective lens is a perishable part, but in order to improve its utilization rate and reduce production costs, you can achieve the purpose of reuse by cleaning the protective lens at regular intervals.

 1, laser cutting machine protective lenses need to be prepared for the replacement of items

 Need to prepare: dust-free cloth; dust-free cloth swabs; 98% or more concentration of anhydrous alcohol; paper; hexagonal wrench; protective lens locking tool; new protective lens.

 2, laser cutting machine protective lens replacement steps

 Laser cutting machine protective lens replacement steps of wipe: alcohol will be wetted with dust-free cloth (in time to cover the cap of the alcohol bottle, so as not to accidentally knock over), with a dust-free cloth gently wipe around the protective lens, the purpose of this process is to avoid the disassembly process dust into the cavity.

 Laser cutting machine protective lens replacement steps of removal: use a hexagonal wrench to remove the hexagonal screws, and then gently pull out the protective lens plug and use the paper to seal the cavity to prevent dust from entering. Insert the protective lens locking workpiece into the hole behind the protective lens insert card, rotate counterclockwise to remove the protective lens, and then insert the block to pour the lens on the dust-free cloth.

 Laser cutting machine protective lens replacement steps of clean: gently wipe the inside of the protective lens insert block with a dust-free cloth face swab to clean it.

 Laser cutting machine protective lens replacement steps of change: remove the new protective lens, tear off one side of the protective paper, and then the protective lens insert gently cover the protective lens, flip, and then tear off the other side of the lens protective paper, in turn, loaded into the pressure plate, locking ring, use the protective lens locking tool clockwise to lock the block.

 Laser cutting machine protective lens replacement steps of the installation: tear off the paper, the protective lens insert gently into the cavity, the hexagonal screw lock.